Power management ICs are used to manage power requirements and to support voltage scaling and power delivery sequencing in power electronic devices. They are the key components in any electronic device with a power supply, battery, or power cord and they optimize power usage. The power management ICs that are used in smartphones are referred to as smartphone power management ICs.
Zero liquid discharge is a process that is beneficial to industrial and municipal organizations as well as the environment because it saves money and no effluent, or discharge, is left over. ZLD systems employ the most advanced wastewater treatment technologies to purify and recycle virtually all of the wastewater produced. Also Zero liquid discharge technologies help plants meet discharge and water reuse requirements, enabling businesses to:
Meet stringent cooling tower blowdown and flue gas desulfurization (FGD) discharge regulations.
Treat and recover valuable products from waste streams.
Better manage produced water.
A Zero liquid discharge facility (ZLD), is an industrial plant without discharge of wastewaters.
ZLD technology includes pre-treatment and evaporation of the industrial effluent until the dissolved solids precipitate as crystals. These crystals are removed and dewatered. The water vapor from evaporation is condensed and returned to the process.
Description
Normally, core body temperature falls between 96.8 °F and 99.5 °F. Patient temperature management enables treatment to a patient by maintaining and achieving core body temperature (normothermia) to avoid hypothermia or hyperthermia. Hypothermia can cause discomfort, prolong healing time, and increase risks during surgeries, while hyperthermia affects the central nervous system. Therefore, hospitals and other healthcare centers adopt patient temperature management systems to control and monitor the core body temperature of a patient.


Description
Electronic grade phosphoric acid belongs to high purity phosphoric acid. It is widely used in large-scale integrated circuits, thin-film liquid crystal display (TFT-LCD) and other microelectronics industry. It is mainly used for chip cleaning and etching. The lower purity is mainly used for the cleaning of liquid crystal panel parts (Panel Level). High purity for cleaning and engraving of electronic wafer production processes (IC Level). Electronic grade phosphoric acid can also be used to prepare high-purity phosphate, but also high-purity organic phosphorus products, the main raw material, also can be used as ultra-high purity reagents and fiber glass raw materials.

Description
Cut & Stack Labels are printed on large sheet or roll fed printing presses. After printing, stacks of label sheets are either die cut into their desired shapes or, more typically, cut into their individual rectangular shapes and stacked (hence the name). The application process most commonly involves overlapping the label and gluing the label to itself (lap).


Description
Normally, core body temperature falls between 96.8 °F and 99.5 °F. Patient temperature management enables treatment to a patient by maintaining and achieving core body temperature (normothermia) to avoid hypothermia or hyperthermia. Hypothermia can cause discomfort, prolong healing time, and increase risks during surgeries, while hyperthermia affects the central nervous system. Therefore, hospitals and other healthcare centers adopt patient temperature management systems to control and monitor the core body temperature of a patient.